Do you think pouring concrete slab is one of the most daunting processes in construction work? Well, you are not alone! Undoubtedly, laying concrete tasks demands utmost care, patience, and a lot of diligence. However, experts suggest using ready mix concrete to pour concrete slab helps to make the process easier. Moreover, the right raw material ensures durability and sturdiness of slabs.

Here in this article, we have enlisted the tips to guide you in pour a concrete slab perfectly. Now, let’s calm down a storm in a teacup and head towards the guide.

Read on!

The Best Materials For Laying Slab

Before hopping onto the pour concrete slab laying process, we will know the raw material you need to add to the list. We know this process is not easy, so you need a helping hand by your side. First, buy the cement from the best suitable on-site ready-mix supplier or company. It will help achieve optimal outcomes.

You need to buy some materials, such as:

  • 6-mil plastic
  • Anchor bolts
  • Cement
  • ½” dia. rebar
  • Tie wire
  • Forming lumber
  • Duplex nails
  • Packable fill

Moreover, get your hands on some safety equipment while working. It includes eye protection glasses, cloth to cover legs or arms, boots made up of rubber, and gloves for your hands.

5 Steps Procedure To Lay A Concrete Slab

Preparing Jobsite

Preparing Jobsite

Before starting the procedure, make sure the job site is ready. There are chances that you might need to take permission to create your patio. Here you need to get a permit from the local building department.

After this, mark the pipes or other lines parallel to where the slab needs to be created. Later it will help in creating slabs on a level.

Build Strong Foundations For Installing Slabs

After preparing Jobsite, get your hands on choosing the right boards. Have a look over some types of boards best-suited for specific areas:

  • Driveways (no thickened edge)– 2-inch x 6-inch boards
  • Sheds and garages– 2-inch x 12-inch boards and thick slabs of minimum 5 inches.

If you don’t find longboards, you can merge 2 or 3 boards together. It could be done by checking everything is aligned and using a cleat over the joint. At last, use a hammer for driving the stakes into the shapes.

Building And Packing The Base

You might have heard that building a strong base is the essential construction element. To create a strong foundation, make sure the base effectively drains. If water is not absorbed properly, it may generate cracks or movement in the concrete. Use the crushed concrete for leveling the ground. While spreading it, make sure it doesn’t exceed more than 3 inches of thickness.

Leave a 12-inch wide trench and a 12 inch deep for a thickened edge.

One more thing is a reinforcement of slab with the help of steel bars. Every Jobsite doesn’t need reinforcement to alleviate the threat of cracks. But it makes a site durable and stronger. So, to reinforce the slabs, you can use steel reinforced bars.

Ready a truck for pouring concrete

Ready a truck for pouring concrete

In some cases, it is required to pour cement in a certain place. So, prepare a concrete truck so you would be able to level it. Pour cement when it is not too hot or too cold.

Calculate the concrete volume by a simple formula

L (length)x W (width) x D (depth) in feet = cubic feet

Ensure pouring the cement into the furthest forms so that it will provide time for setting. Also, pouring must be very quick, so the consistency remains the same.

While positioning it in between the concrete slab, lift the rebar. Later start to smooth it with the help of a screed board. Try to make many passes with the help of a screed board, but don’t move huge volumes of cement at one time.

The final touch

Once you have completed the concrete pouring process, allow water leakage because it is important for the hardening. After it gets hard, resume finishing work with the help of a hand-float. The most preferred way of checking concrete for the slab is by pressing the thumb to an edge.

Don’t kneel directly over the cement. Rather, use a kneeling board for distributing your weight on the surface now. After it supports your weight, start grooving over it. Grooving is necessary because it positions the inevitable shrinkage cracking to take place. Now, cut the groove for every 10 feet of the slab.

For getting a dense and smoother finish, start troweling. But, make sure an expert handles the trowelling process. It is usually produced for warehouses and large slab areas.

After trowelling, keep the area moist for attaining maximum strength. The curing process takes at least 28 days to get maximum strength.

Choose The Best Concrete Suppliers!

So, have you understood the entire process? Or are you still finding pouring concrete slabs a difficult task? Well, no worries, we are here to help you!

Evident Ready Mix is one of the topmost onsite ready mix concrete providers in the town. Here you will get high-quality ready mix concrete, which will help make the cement pouring process easier.

Choosing Evident Ready Mix will be the best decision because it has numerous happy and satisfied clients. Moreover, with decades of experience, you will get materials at an affordable price.

Want to know more about the services? Get connected to the executives of Evident Ready Mix.